Vinyl flooring is easy to install – but getting the perfect finish can be more of a challenge. That’s where vinyl flooring rollers come in.
These clever gadgets help your vinyl stick firmly to your sub-floor. And they can speed up the whole installation process, as well as providing an even finish. But when it comes to choosing the right roller, where do you start?
We’re here to help! We’ve found ten of the best vinyl flooring rollers to help your project go smoothly. Read on, as we take a look at their pros and cons.
The Best Vinyl Flooring Roller on the Market
1. Fulton 2214 (Our Top Pick)
Fulton’s 2214 is a mid-priced roller that offers plenty of great features.
First up, there’s an extendable handle that can be adjusted from 17 to 27 inches. The rubber grip is comfortable to hold, and extending the handle is easy. Just turn it counterclockwise, then turn it back again to lock it in place.
But note that this can be a little too easy to do! Take care as you’re rolling not to twist the handle by accident.
And don’t be too enthusiastic when you extend the handle. There’s nothing to stop it when it reaches the maximum length. That means you may find yourself having to slot the pieces back together again!
The roller is 7.5 inches wide and has a diameter of 1.5 inches. It’s divided into three segments. That allows the pressure to be distributed evenly across the whole width.
There’s also a second, heavy duty handle right next to the roller. That means you can apply additional pressure where it’s needed most. And the rubber is formulated so that it won’t leave behind marks on your flooring.
- Handle extends from 17 to 27 inches
- Secondary handle to allow you to apply extra pressure close to the surface
- Roller is divided into three segments for even pressure
- It’s a little too easy to extend the handle – take care not to twist it by accident
- There’s nothing to stop the handle coming apart when extended too far.
2. POWERTEC 71033
The POWERTEC 71033 is a little more expensive than the Fulton 2214, but shares several similar features.
It too has a telescopic handle, and it extends from 17 to 27 inches. There’s a rubber grip, so it’s easy on your hands as you work. But if you’re tall and have a large area to cover, the handle may be a little short.
There’s a twist and lock mechanism to adjust it. Just turn it counterclockwise to loosen, then clockwise to lock it in your chosen position. But as with the Fulton model, you may find it a little too easy to loosen it unintentionally.
The roller is comprised of three evenly-sized segments. Each is 2.5 inches long, giving a total width of 7.5 inches. They’ll help distribute the pressure evenly as you work.
This is another design with a second die-cast metal handle near the roller. That gives you something to hold onto to increase the pressure near the floor. And the rubber construction and inset axle mean it won’t leave marks as you work.
- Segmented roller to help keep the pressure even
- Secondary handle near the roller allows you to apply extra pressure
- Inset axle and rubber roller prevent marks on your floor
- It’s a little too easy to adjust the handle length by accident
- The maximum handle length of 27 inches may be too short for taller users.
3. Amtico Karndean 2590
This roller from Amtico Karndean is another mid-priced option with sturdy construction. And it too offers a telescopic handle.
In this case, the range is slightly smaller. The minimum length is 18 inches, and the maximum is 24 inches. If you have a large area to cover, however, you may prefer something with more stretch.
The rolling portion is made of nylon that won’t leave marks behind on your floor. And it’s divided into three segments to help you maintain an even pressure.
There’s a secondary handle made of die-cast metal, that sits just next to the roller. That allows you to press down hard on any areas where you need extra heft.
The handle extends and retracts using the familiar twist-and-lock mechanism. If you turn it by accident as you’re rolling, you may find it suddenly changes length. And loosen it too far, and the outer tube can come off entirely.
- Telescopic handle
- Secondary handle to apply extra pressure near the floor
- Three-section roller helps keep the pressure even as you work
- The maximum handle length of 24 inches may be too short for some
- It’s easy to change the length of the handle unintentionally by twisting it as you roll.
4. Fulton 2212
The 2212 is the second model from Fulton to make our list. It’s a little over half the price of the 2214, so it’s a great option if you’re watching your budget.
The design here is simple but effective. There’s a thick rubber roller with a 1.5-inch diameter, formed in a single piece. It has a textured surface and won’t leave marks on your flooring.
The handle is 12 inches long. It’s made of heavy duty steel, and attaches to the roller with a J-hook to improve leverage. A rubberized grip protects your hands as you work.
It isn’t telescopic, so you’ll need to be on your hands and knees to use this on vinyl flooring. But you won’t have to worry about the handle changing length accidentally. And the shorter length makes it easier to keep the pressure even against the floor.
There isn’t a secondary handle with this one, though. That means it’s hard to get as much pressure on stubborn areas of flooring.
- Heavy duty steel handle with rubberized grip
- Textured rubber roller won’t leave marks on your floor
- The handle is attached to the roller with a J-hook to improve leverage
- The handle is only 12 inches long
- There’s no secondary handle, so it’s more difficult to exert a lot of pressure.
5. DCT 9084
The DCT utilises a very similar design to the Fulton 2212, and it’s about the same price too. This one comes with the reassurance of a one-year warranty from the manufacturer.
The roller here is positioned via a J-hook to the handle, to allow you to get more leverage. The handle measures 12.5 inches long, and the total length is 14 inches.
The roller is made of hard rubber, and it’s 3 inches long. It’s great for smaller areas, but if you’re flooring a larger space, you may prefer something bigger. But it’s sturdy enough. Plastic friction bearing and snap rings on either side make it strong and durable.
One irritation with this is the rubberized grip, a feature designed to make the roller easy on your hands. Unfortunately, it isn’t stuck securely in place. That means it tends to migrate down the handle as you work.
- Simple, robust design, great for pressing seams between vinyl tiles
- J-hook between the handle and roller improves leverage
- Comes with a 1-year warranty
- The rubberized grip tends to travel down the handle as you work
- The roller is only 3 inches long, so won’t be the best choice if you have a large area to cover.
This roller from NEICOTOOLS is fairly expensive for a small tool. It comes in at about the same price as the Fulton 2214, but it’s on a much smaller scale. It is, however, solidly built and heavy duty. And if you don’t mind getting low to your floor to work, it will give you excellent results.
The roller here is made of steel. It’s 2 inches in diameter and 2 inches long. That will be fine for pressing seams between vinyl planks. But it won’t be the best choice for rolling the whole surface of glue-down flooring.
The roller turns on permanently sealed and lubricated bearings. These keep it moving smoothly.
The handle is short, just over 5 inches long. It’s made of chunky, beautifully finished wood. But it isn’t long enough to use with both hands.
On the plus side, the whole thing is very heavy. You won’t have to rely so much on your own muscle power to exert the pressure.
- High quality construction – this will last for years
- Permanently sealed and lubricated bearings for smooth movement
- The solid weight will mean less work for you in pressing down
- The handle is too short to be used two-handed
- The roller is only 2 inches long.
7. NEICOTOOLS Corner Detail Roller
If you’re looking for a roller to get into the corners of your vinyl flooring, check out this one. It has the same quality construction as the other roller from NEICTOOLS. But this one is designed to be small enough to get into those tricky nooks and crannies.
The roller is just under a quarter of an inch wide and has a diameter of 1.2 inches. It has a convex shape and is made of solid brass. The high quality bearings mean it’s perfect for rolling a neat, smooth line.
The roller is offset from the handle with a stainless steel fork. The angle means it’s easy to get good downward pressure.
The handle is made of solid wood and measures 5 inches long. You’ll need to get down close to your floor to use it. And it’s not long enough to be used with both hands. But for detailed work, this is ideal.
- The small, solid brass roller is perfect for getting into the corners of vinyl flooring
- High quality bearings produce smooth movement
- The stainless steel fork offsets the roller from the handle, improving leverage
- The handle is only 5 inches long, so you’ll need to get down close to the floor …
- … and it’s not long enough to be used with both hands.
8. Roberts 10-950
The Roberts 10-950 roller sits at the other end of the spectrum from NEICOTOOLS’ corner roller. This one is big and heavy duty, designed to cover large areas with ease.
You will have to pay much more for this. It’s more than 17 times the price of the cheapest roller on our list! But if you have deep pockets, it’s a quality bit of kit.
The roller here is divided into three segments, and it’s made of steel. There are inset axles to avoid any risk of you scuffing the walls as you work. The full-length handle is detachable for easy storage, and there’s a built-in carry grip.
The whole thing weighs just shy of 75 pounds. You’ll be able to push it along as you walk, letting the weight do all the work for you. And you’ll get perfect seams between your vinyl planks.
You’ll need to do a bit of assembly before the first use. And because the rollers are steel, you’ll need to protect them to prevent them from rusting over time.
- Very easy to use – just walk along and push the roller
- Weighs 75 pounds, so you won’t need to apply any downward pressure
- The full-length handle is detachable for easy storage
- Much more expensive than hand-held rollers, and requires more space for storage
- Requires some assembly before the first use.
9. POWERTEC 71010
The 17010 from POWERTEC utilises a similar design to the Fulton 2212. And it occupies the same price point.
The thick rubber roller comes in a single section. It’s offset from the handle with a J-hook, creating more leverage. There’s also a version with a straight handle if you prefer.
The rubber roller won’t mark your flooring. It’s 3 inches long, and has a diameter of 1.5 inches.
The top of the handle is covered in a rubberized grip, making it comfortable to use. But this is another case where it isn’t glued in place. You may find it slips downwards as you’re using it.
- Good size for rolling seams between vinyl planks
- Choice of curved or straight handles
- The rubber roller won’t mark your floor
- The grip can travel down the handle as you use it
- Not the best choice to cover a large area.
This roller from WoodyWalls is the least expensive option on our list. It has a straight handle and a rubber roller that’s in a single piece. It’s not the biggest or heaviest option out there. But if you’re looking for a low-cost tool to get a good finish on your vinyl, it will do the job.
The roller is just 3 inches long, and 1.5 inches in diameter. It won’t leave marks on your floor. And the 12-inch aluminum handle is covered in a rubber grip to avoid blisters on your hands.
It’s all pretty lightweight, so you’ll need to press down to exert the pressure. And there isn’t a secondary handle to help.
But if you don’t have a large area to cover, this may be all you’ll need.
- Simple design with no complicated parts to go wrong
- The rubber roller won’t leave marks behind on your floor
- Comfortable grip that’s easy on your hands
- Lightweight, and there’s no secondary handle to help increase the pressure
- The roller is just 3 inches long.
Ready to choose the perfect roller for your flooring?
We hope you’ve enjoyed our list of 10 of the best vinyl flooring rollers out there! Whether you need a small tool for corners, or a full-sized heavy-weight roller, there are options to suit.
Our top pick is the Fulton 2214. Its three-section roller and secondary handle will help you apply plenty of pressure to get a great result. And you won’t have to spend a fortune either.
But whichever model you choose, a roller can help get a beautifully finished floor with far less effort. We hope you enjoy using yours!